Chauvet b50 Printer User Manual


  Open as PDF
of 4
 
B-50 Lil’ Bubbler™ QRG
Page 3 of 4
What Is
Included
• Lil’ Bubbler
• Fluid Tank
• Warranty Card
• Quick Reference Guide
AC Power
This product has a voltage-specific power supply that can work with an
input voltage of 120 VAC, 60 Hz (U.S.) or 230 VAC, 50 Hz (UK).
Product Overview
Dimensions: 10.8 x 6.5 x 6.7 in (274 x 165 x 170 mm)
Weight: 3.7 lbs (1.65 kg)
Set Up
Place unit on a flat, level surface or use the mounting brackets provided.
Ensure that the bubbles are not shooting directly in anyone’s face or above
heavy traffic areas, as bubble fluid leaves a slippery surface.
The bubble machine must not have more than a 5º angle of inclination. Do
not tilt the bubble machine or the fluid will spill.
Fuse
Replacement
1. Disconnect this product from the power outlet.
2. With a Phillips #2 head screwdriver, unscrew the fuse holder cap from
the housing.
3. Remove the blown fuse and replace with a good fuse of the same type
and rating (F1A, 250 V).
4. Screw the fuse holder cap back into place and reconnect power.
Handle (Top)
Fluid Tank Access
Fuse holder
(Rear Panel)
Fan (Rear
Panel)
Bubble Wands
 previous