Filter
Top Products
Page 12 of 26 Scorpion™ GVC/RVM/RGY User Manual (Rev. 02k)
Mounting
Orientation
The Scorpion™ GVC/RVM/RGY units
may be mounted in any position, provided
there is adequate room for ventilation.
Rigging
Be sure that the structure onto which you are mounting this product can support its
weight. Please see the “Technical Specifications” section of this manual for weight
information.
Mount the fixture securely. You can do this with a screw, a nut, and a bolt. You could
also use a mounting clamp if rigging this product onto a truss. The bracket has a hole
13 mm in diameter, which is appropriate for this purpose.
When mounting this product overhead, always use a safety cable.
Always consider ease of access to the unit for maintenance and programming
purposes before deciding on a location for this product
When power linking multiple fixtures, always consider the length of the power linking
cable and mount the fixtures close enough from each other to accommodate for this.
The bracket knobs allow for directional adjustment when aiming the fixture to the
desired angle. Do not use tools to loosen or tighten the bracket knobs. Doing
otherwise could damage the knobs.
Mounting Diagram
Hanging Bracket
Bracket Adjustment
Knob (1 of 2)
Rubber Feet
13 mm hole
Safety Loop