Filter
Top Products
Installation Instructions XSM/XTM Series
11
Adjusting Roll/Height of Wall Brackets
NOTE: The height adjust wall brackets allow adjustment of
+ 1/2".
1. Turn to right (tighten) to raise side of screen.
(See Figure 11)
2. Turn to left (loosen) to lower side of the screen.
Figure 11
Locking XTM Mount (Optional)
1. Add optional security bracket (N) to the mount.
(See Figure 12)
2. Add padlock (not included) to complete security.
Figure 12
Locking XSM Mount (Optional)
Add padlock (not included) to interface bracket tab to lock the
XSM mount. (See Figure 13)
Figure 13
Raises screen
Lowers screen
1
2
(P)
(Screen not shown for clarity)
(N)
1
2
(XTM Shown)
Add padlock