Filter
Top Products
Christie Roadie 25K
Specifications
New 10-bit image processing and standard Dual
SD/HD-SDI input module provide a broader color
spectrum, wider signal compatibility.
Single-button direct key access, auto
set-up and power-up put real control
at your fingertips.
D
ISPLAY TECHNOLOGY
AND RESOLUTION
•
3-chip 1.25" Darkchip3™ DMD™
•
2048 x 1080
BRIGHTNESS
•
8
000 – 25,000 ANSI lumens (± 10%)
•
90% brightness uniformity across the
screen
CONTRAST RATIO
•
H
igh Brightness lens: 1600:1 on/off
•
High Contrast lens: 1800:1 on/off
•
ANSI Contrast, both lenses: 650:1
•
High Contrast optional aperture: 2800:1
I
NPUT LINE VOLTAGE
•
Ballast: 3-phase 200-230 VAC ± 10% @
50/60 Hz (max 24A per phase)
•
3-phase 380-415 VAC ± 10%
@ 50/60 Hz (max 12.5A per phase)
•
Projection Head: Single-phase 200 VAC
to 240 VAC ± 10% @ 50/60 Hz
COLOR PROCESSING
•
10-bit digital processing
SCAN RA
TES
•
Horizontal – 15 kHz to 120 kHz
•
Vertical – 23.97 Hz to 150 Hz
EXTRACTION F
AN
•
8"exhaust port located at the projection
head for extraction of hot air; extraction
fan is r
equired (min 600 cfm at projector)
VIDEO DECODER
•
Built-in multi-standard video decoder
(NTSC,
NTSC4.43, PAL, PAL M, PAL N,
P
AL
60,
SECAM)
LAMP
•
Xenon bubble lamp, field replaceable
•
High brightness: CDXL60, CDXL45,
CDXL30 and CDXL20
•
Standard lamps: CXL60, CXL45, CXL30
•
Lamp
life:
600
– 2400 hours (depending on
lamp model)
•
Auto LampLOC™ – automatic, for
optimized brightness and unifor
mity
POWER SUPPL
Y
•
Separate 7kW low-ripple switch mode
lamp ballast
I
NPUTS, CONTROL
& NETWORKING
•
RGBHV/YPbPr: 5 BNC
•
DVI-I: digital/analog RGB/YPbPr
•
Dual SD/HD-SDI module
•
One composite video, one S-Video
•
2 RS-232 ports and 3 RS-422 ports
•
On-board ChristieNET™ connectivity
(RJ45)
•
IR remote, built-in backlit keypad/
status display
LENS MOUNT
•
Manual operation for focus, zoom
and horizontal and vertical offset
W
EIGHT
•
Projection head (approx): 260 lb (118.2 kg)
•
Ballast (approx): 110 lb (50 kg)
•
Optional FredFrame (approx): 105.4 lb
(47.9 kg) with Fork Lift Tubes and Castors
STANDARD ACCESSORIES
•
IR keypad w/batteries
•
Line cord
•
Dual SD/HD-SDI module
•
User manual
OPTIONAL ACCESSORIES
•
Extraction Fan Kit (mandatory)
•
High Brightness lenses: 1:1, 1.25-1.45:1,
1.45-1.8:1, 1.8-.2.4:1, 2.2-3.0:1, 3.0-4.3:1,
4.3-6.0:1, 5.5-8.5:1
•
High Contrast lenses: 1.25:1.45:1,
1.45-1.8:1, 1.8-2.4:1, 2.2-3.0:1, 3.0-4.3:1,
4.3-6.0:1, 5.5-8.5:1
•
Rigging frame
•
1.26X Anamorphic Lens
•
Anamorphic lens mount
•
ChristieTWIST™ Image Warping module
with enhanced edge-blending
•
Dual SD/HD-SDI (additional module),
DVI and legacy interface modules
•
Wired remote control
•
Remote IR sensor
•
Ethernet, RS-232 and RS-422 cables
•
Service manual
•
KoRE™ 10-bit librarian
•
Stacking of
fset extractor duct
Offering extreme brightness, high
c
ontrast and installation and application
flexibility – the Christie Roadie 25K
shines virtually anywhere you put it.
DIMENSIONS (W X L X H)
•
Projection Head (approx): 25.6" x 49.0" x
20.5" (650mm x 1250mm x 520mm)
•
Ballast (approx): 21.3" x 17.3" x 20.9"
(540mm x 440mm x 530mm)
•
Optional rigging frame (approx):
33.5" x 54.9" x 25.7"
(851mm x 1395mm x 653mm)
REGULATORY APPROVALS
•
UL/CSA/IEC 60950 (3r
d edition)
•
FCC Class A, CE, CCC (pending)
•
This pr
oduct confor
ms to all r
elevant
European directives, standards, safety,
health and environmental concerns
WARRANTY
•
2 years parts and labor (including
light engine)
Optional rigging frame – constructed of
2" aluminum tubing for strength.
For the
most
cur
r
ent
specification information, please visit
www
.christiedigital.com
Copyright 2005 Christie Digital Systems, Inc. All rights r
eser
ved. All brand names and product names are trademarks,
registered trademarks or tradenames of their respective holders. Canadian manufacturing facility is ISO 9001:2000 certified.
The DLP™ logo and DLP™ Medallion ar
e trademarks of Texas Instruments.
Performance specifications ar
e typical. Due to constant r
esear
ch, specifications ar
e subject to change without notice.
Printed in Canada. 2103
Aug 06-NA
WWW.CHRISTIEDIGITAL.COM
Corporate Offices
U
SA – CYPRESS
PH: 714-236-8610
FX: 714-503-3385
s
ales-us@christiedigital.com
C
ANADA – KITCHENER
PH: 519-744-8005
FX: 519-749-3136
s
ales-canada@christiedigital.com
Worldwide Offices
UNITED KINGDOM
P
H: +44 118 977 8000
F
X: +44 118 977 8100
sales-europe@christiedigital.com
GERMANY
PH: +49 2161 664540
FX: +49 2161 664546
sales-europe@christiedigital.com
FRANCE
PH: +33 (0) 1 47 48 28 07
FX: +33 (0) 1 47 48 26 06
sales-france@christiedigital.com
HUNGARY / EASTERN EUROPE
PH: +36 (0)1 47 48 100
FX: +36 (0)1 47 48 452
sales-eeurope@christiedigital.com
SOUTH AFRICA
PH: +27 (0) 317 671 347
FX: +27 (0) 317 671 347
sales-africa@christiedigital.com
SINGAPORE
PH: +65 6877 8737
FX: +65 6877 8747
sales-singapore@christiedigital.com
SHANGHAI
PH: +86 21 6278 7708
FX: +86 21 6270 5816
sales-china@christiedigital.com
BEIJING
PH: +86 10 6561 0240
FX: +86 10 6561 0546
sales-china@christiedigital.com
KOREA
PH: +82 2 702 1601
FX: +82 2 702 1602
sales-korea@christiedigital.com
JAPAN
PH: +81 3 3599 7481
FX: +81 3 3599 7482
sales-japan@christiedigital.com