Christie Digital Systems HD+30K Projector User Manual


 
Christie Roadie HD
+
30K
Specifications
DISPLAY TECHNOLOGY
AND RESOLUTION
3-chip 1.25" Darkchip3™ DMD™
Native 2048 x 1080
BRIGHTNESS
3
0,000 ANSI lumens ±10%
90% brightness uniformity across
the screen
INPUT LINE VOLTAGE
Ballast 200V setting:
3-Phase 200–240 VAC @ 50/60 Hz
(max 24A per phase)
Ballast 400V setting:
3-Phase 380–415 VAC @ 50/60 Hz
(max 12.5A per phase )
Projection Head:
S
ingle phase 200–240 V
AC @ 50/60 Hz
(max 4A)
LAMP
2 kW, 3 kW, 4.5 kW 6.0 kW Xenon
Bubble lamp
750 hours (typical) lifetime
User r
eplaceable bulb
Low cost of ownership
POWER SUPPLY
Separate 7kW low-ripple switch mode
lamp ballast
INPUTS, CONTROL
& NETWORKING
RGBHV/YPbPr: 5 BNC
DVI-I: analog/digital RGB/YPbPr (HDCP)
Two option slots for analog/digital modules
One composite video, one S-Video
2 RS-232 por
ts and 3 RS-422 ports
On-board ChristieNET™ connectivity (RJ45)
IR remote, built-in backlit keypad/status
display
1 GPIO port
LENS MOUNT
T
ool-fr
ee lens inser
tion system
Tilt adjustment
WEIGHT
322lbs (146kg)
Shipping weight: 422lbs (191kg)
STANDARD ACCESSORIES
I
R keypad w/batteries
Line cord
Handles for carrying and rigging
Dual SD/HD-SDI module
User manual
O
PTIONAL ACCESSORIES
High Brightness lenses:
1.1, 1.25–1.45:1,1.45–1.8:1, 1.8–2.4:1,
2.2–3.0:1, 3.0–4.3:1, 4.3–6.0:1, 5.5–8.5:1
High Contrast lenses:
1.25–1.45:1, 1.45–1.8:1, 1.8–2.4:1,
2.2–3.0:1, 3.0–4.3:1, 4.3–6.0:1, 5.5–8.5:1
1.26X Anamorphic Lens
Anamorphic Lens Mount
Remote IR sensor
ChristieTWIST™ Image Warping and
Edge-Blending module
Input modules – DVI and legacy interface
modules
Ether
net, RS-232, RS-422 cables
Service manual
KoRE™
10-bit librarian
Rigging/stacking frame
Rigging clamps
High contrast apertures kit
6', 25', 50' and 100' ballast cable kits
DIMENSIONS
Projection Head With Handles: (L x W x H)
50.5" x 31.5" x 24.5"
(1283 mm x 787 mm x 622 mm)
Projection Head: 49"x 25.6"x 20.5"
(1245 mm x 650 mm x 521 mm)
Ballast (approx): 21.3" x 17.3" x 20.9"
(540 mm x 440 mm x 530 mm)
Optional rigging frame (appr
ox):
33.5"x 54.9"x 25.7”
(851 mm x 1395 mm x 653 mm)
*All measur
ements exclude lens, feet and
stacking points but include the span of the
standar
d handles
REGULATORY APPROVALS
UL/CSA/IEC 60950-1
FCC Class A, CE, CCC (pending)
This product conforms to all relevant
European directives, standards, safety,
health and environmental concerns
W
ARRANTY
2 years parts and labor (including
light engine)
WWW.CHRISTIEDIGITAL.COM
Corporate Offices
U
SA – CYPRESS
PH: 714-236-8610
FX: 714-503-3385
s
ales-us@christiedigital.com
C
ANADA – KITCHENER
PH: 519-744-8005
FX: 519-749-3136
s
ales-canada@christiedigital.com
Worldwide Offices
UNITED KINGDOM
P
H: +44 118 977 8000
F
X: +44 118 977 8100
sales-europe@christiedigital.com
GERMANY
PH: +49 2161 664540
FX: +49 2161 664546
sales-europe@christiedigital.com
FRANCE
PH: +33 (0) 1 47 48 28 07
FX: +33 (0) 1 47 48 26 06
sales-france@christiedigital.com
HUNGARY / EASTERN EUROPE
PH: +36 (0)1 47 48 100
FX: +36 (0)1 47 48 452
sales-eeurope@christiedigital.com
SOUTH AFRICA
PH: +27 (0) 317 671 347
FX: +27 (0) 317 671 347
sales-africa@christiedigital.com
SINGAPORE
PH: +65 6877 8737
FX: +65 6877 8747
sales-singapore@christiedigital.com
SHANGHAI
PH: +86 21 6278 7708
FX: +86 21 6270 5816
sales-china@christiedigital.com
BEIJING
PH: +86 10 6561 0240
FX: +86 10 6561 0546
sales-china@christiedigital.com
KOREA
PH: +82 2 702 1601
FX: +82 2 702 1602
sales-korea@christiedigital.com
JAPAN
PH: +81 3 3599 7481
FX: +81 3 3599 7482
sales-japan@christiedigital.com
10-bit image processing and standard Dual SD/HD-SDI input module provide a wider
signal compatibility.
Single-button direct key access, auto
set-up and power-up put real control
at your fingertips.
The Roadie HD+30K delivers superior
image quality and ability to stack, blend
a
nd color-match multiple projectors.
For the
most
cur
r
ent
specification information, please visit
www
.christiedigital.com
Copyright 2007 Christie Digital Systems, Inc. All rights r
eser
ved. All brand names and product names are trademarks,
registered trademarks or tradenames of their respective holders. Canadian manufacturing facility is ISO 9001:2000 certified.
The DLP™ logo and DLP™ Medallion ar
e trademarks of Texas Instruments.
Performance specifications ar
e typical. Due to constant r
esear
ch, specifications ar
e subject to change without notice.
Printed in Canada. 2179
Apr 07-NA