Christie Digital Systems HD Series Projector User Manual


 
HD2Kc HD3K HD5Kc HD6K HD7Kc HD8K Roadster HD12K Roadster HD18K
Image
brightness
2300 ANSI lumens @ 500W •
[2550 center lumens]
1600 ANSI lumens @ 350W •
[1785
center
lumens]
2900 ANSI lumens @ 500W •
[3200 center lumens]
2030 ANSI lumens @ 350W •
[2240
center
lumens]
5000 ANSI lumens @ 200 VAC •
[5500 center lumens]
3850 ANSI lumens @ 110 VAC •
[4250
center
lumens]
6500 ANSI lumens @ 200 VAC •
[7100 center lumens]
5000 ANSI lumens @ 110 VAC •
[5500
center
lumens]
6500 ANSI lumens •
[7200 center lumens]
8000 ANSI lumens
•
[8800 center lumens]
12,000 ANSI lumens (±10%)
•
[13,200 center lumens]
18,000 ANSI lumens (±10%)
•
[19,800 center lumens]
contrast
1600-2000:1 (full on/off) • 400:1 min ANSI 1600-2000:1 (full on/off) • 400:1 min ANSI
uniformity
90% brightness• 90% brightness•
Display
type
native resolution
3-chip 0.95" DMD • 3-chip 0.95" DMD •
HD (1920 x 1080)• HD (1920 x 1080)•
Lamp
type
life
500W CERMAX•
®
Xenon pre-aligned lamp module 1kW CERMAX•
®
Xenon pre-aligned lamp module 1.2kW CERMAX•
®
Xenon pre-aligned lamp module
2.0kW Xenon bubble lamp module• 3.0kW Xenon bubble lamp module•
Up to 2500 hours @ 500W • Up to 4000 hours @ 350W 1500 hours (typical) lifetime• 1500 hours (typical) lifetime• 1000•
hours (ty
pical) lifetime 750•
hours (ty
pical) lifetime
Input
signal compatibility
HDTV formats VGA through to QXGA (2048 x 1536) • Accepts all current HDTV/DTV formats
Multi-standard video decoder
• Horizontal and vertical scaling, all inputs
HDTV formats VGA through to QXGA (2048 x 1536)
• Accepts all current HDTV/DTV formats
Multi-standard video decoder
• Horizontal and vertical scaling, all inputs
pixel clock
210 MHz• 210 MHz•
scan rates
15 kHz to 120 kHz Horizontal • 23.97 Hz to 150 Hz Vertical 15 kHz to 120 kHz Horizontal • 23.97 Hz to 150 Hz Vertical
Inputs, control
and networking
RGBHV/YPbPr via 5 BNC • DVI-I – digital/analog RGB/YPbPr (HDCP) One composite video, one S-video
Two optional slots for analog/digital modules
• 2 RS-232 ports, 1 GPIO port, 1 RS-422 port
On-board ChristieNET™ connectivity (RJ45)
• Built-in backlit keypad and IR remote control
RGBHV/YPbPr via 5 BNC
• DVI-I – digital/analog RGB/YPbPr (HDCP) One composite video, one S-video
Two optional slots for analog/digital modules
• 2 RS-232 ports, 1 GPIO port, 1 RS-422 port
On-board ChristieNET™ connectivity (RJ45)
• Built-in backlit keypad and IR remote control
Optical system
Dust sealed, 3-chip DMD light engine • Motorized horizontal and vertical lens offset Scheimpflug (tilt) adjustment
Built-in light shutter
• Tool-free lens insertion system
Dust sealed, 3-chip DMD light engine
• Motorized horizontal and vertical lens offset Scheimpflug (tilt) adjustment
Built-in light shutter
• Tool-free lens insertion system
Lens options
fixed
zoom
offsets
0.67:1*, 1.1:1 • 0.67:1*, 1.1:1 •
1.16-1.49:1, 1.4-1.8:1, 1.8-2.6:1, 2.6-4.1:1, 4.1-6.9:1, 6.9-10.4:1 • 1.16-1.49:1, 1.4-1.8:1, 1.8-2.6:1, 2.6-4.1:1, 4.1-6.9:1, 6.9-10.4:1•
±120% Vertical • ±42% Horizontal (* ±50%V ±20%H) ±120% Vertical • ±42% Horizontal (* ±50%V ±20%H)
Accessories
standard
IR keypad (w/batteries) • Line cord User manual Input modules – Dual SD/HD-SDI, DVI IR keypad (w/batteries) • Line cord User manual Input modules – Dual SD/HD-SDI, DVI
optional
Christie Twist™ image warping and edge-blending module • Input modules Dual SD/HD-SDI, DVI and legacy interface modules
Wired remote control and RS-422
• Remote IR sensor Ethernet, RS-232, RS-422 cables Service manual KoRE™ 10-bit librarian
Lens adapter (can be used with competitors lenses) Stacker and more (see accessories brochure)
Christie Twist™ image warping and edge-blending module
• Input modules Dual SD/HD-SDI, DVI and legacy interface modules
Wired remote control and RS-422
• Remote IR sensor Ethernet, RS-232, RS-422 cables Service manual KoRE™ 10-bit librarian
Lens adapter (can be used with competitors lenses)
• Stacker and more (see accessories brochure)
Enhanced
feature sets
LiteLOC™ • Film-like color reproduction with Kc models Comprehensive Color Adjustment (CCA™)
User replaceable bulb in Roadster models
• Intelligent Lens System (ILS™) for zoom and focus on the zoom lenses
Built-in edge blending
• Menus in five languages 50 channel memories Auto setup Digital keystone correction
LiteLOC™
• Film-like color reproduction with Kc models Comprehensive Color Adjustment (CCA™)
User replaceable bulb in Roadster models
• Intelligent Lens System (ILS™) for zoom and focus on the zoom lenses
Built-in edge blending
• Menus in five languages 50 channel memories Auto setup Digital keystone correction
Power requirements
operating voltage
operating current
power
dissipation
100 VAC to 240 VAC ± @ 50/60 Hz• 200 VAC to 240 VAC ± @ 50/60 Hz•
10A @ 100 VAC / 5A @ 200 VAC• 10.4A @ 100 VAC / 8A @ 200 VAC• 10A @ 200 VAC• 15A @ 200 VAC• 14.8A @ 264 VAC•
879W maximum• 1600W maximum• 2000W maximum• 3000W• 3900W•
3000 BTU/hr• 5460 BTU/hr• 6825 BTU/hr• 10,236 BTU/hr• 13,320 BTU/hr•
Dimensions
size
volume
weight
shipping weight
(LxWxH): 22.3 x 26.0 x 12.32" (566 x 660 x 313mm)• (LxWxH): 22.3 x 26.0 x 12.32" (566 x 660 x 313mm)• (LxWxH): 32.1 x 24.5 x 15.1" (814.8 x 631.4 x 384mm)•
7132 in•
3
(116,924 cm
3
) 7132 in•
3
(116,924 cm
3
) 11,875 in•
3
(197,555 cm
3
)
72 lb (32.1 kg)• 75 lb (34 kg)• 80 lb (36.3 kg)• 135 lb (61.4 kg)• 160 lb (72.6 kg)•
115 lb (52 kg)• 120 lb (54.4 kg)• 125 lb (56.7 kg)• 160 lb (72.6 kg)• 230 lb (104.3 kg)•
Operating environment
Temperature: 40 to 95º F (5 to 35º C) • Humidity: 20-80% non-condensing Temperature: 40 to 95º F (5 to 35º C) • Humidity: 20-80% non-condensing
Regulatory approvals
This product conforms to the following regulations related to product safety, environmental requirements and electromagnetic compatibility (EMC):
FCC Part 15, Subpart B Class A; CISPR22/EN55022; CISPR24/EN55024 UL 60950-1 First edition; CAN/CSA-C22.2 No 60950-1-03 First edition;
IEC60950-1:2001 2002/95/EC RoHS
This product conforms to the following regulations related to product safety, environmental requirements and electromagnetic compatibility (EMC):
FCC Part 15, Subpart B Class A; CISPR22/EN55022; CISPR24/EN55024 UL 60950-1 First Edition; CAN/CSA-C22.2 No 60950-1-03 First edition;
IEC60950-1:2001 2002/95/EC RoHS
Limited warranty
2 years parts and labor (including light engine)•
Contact an authorized Christie representative for full details of our limited warranty 2 years parts and labor (including light engine)•
Contact an authorized Christie representative for full details of our limited warranty
5 TECHNICAL SPECIFICATIONS