Filter
Top Products
8
LX41/LW41 Setup Guide 020-000510-01 Rev. 1 (06-2012)
Connecting power supply
1.
Put the connector of the power cord into the
AC IN (AC inlet) of the projector.
2.
Firmly plug the power cord’s plug into the
outlet. In a couple of seconds after the
power supply connection, the POWER
indicator will light up in steady orange.
Please remember that when the DIRECT POWER ON
function activated, the connection of the power supply make the projector turn on.
Turning on the power
1.
Make sure that the power cord is fi rmly and
correctly connected to the projector and the outlet.
2.
Make sure that the POWER indicator is
steady orange. Then remove the lens cover.
3.
Press the STANDBY/ON button on the
projector or the remote control.
The projection lamp will light up and the
POWER indicator will begin blinking in green.
When the power is completely on, the indicator
will stop blinking and light in steady green.
VIDEO
DOC.CA
MERA
KEYS
TONE
ASPECT
SEARCH
BLA
NK
MUTE
MY BUTTON
POSITION
ESC
MENU
RESET
COMPU
TER
MY SOU
RCE/
AUTO
MAGNIF
Y
PAGE
DOWN
ON
OFF
FREEZE
UP
㧗
VOLUME
ENTER
WARNING ►Please use extra caution when connecting the power cord, as
incorrect or faulty connections may result in fi re and/or electrical shock.
• Do not touch the power cord with a wet hand.
• Only use the power cord that came with the projector. If it is damaged, consult
your dealer to get a new one. Never modify the power cord.
• Only plug the power cord into an outlet whose voltage is matched to the power
cord. The power outlet should be close to the projector and easily accessible.
Remove the power cord for complete separation.
•
Do not distribute the power supply to multiple devices. Doing so may overload the outlet
and connectors, loosen the connection, or result in fi re, electric shock or other accidents.
NOTICE ►This product is also designed for IT power systems with a phase-
to-phase voltage of 220 to 240 V.
WARNING ►A strong light is emitted when the projector’s power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projector’s openings.
NOTE • Please power on the projector prior to the connected devices.
• The projector has the DIRECT POWER ON function, which can make the
projector automatically turn on. For more information, please see User Manual
- Operating Guide.
AC IN
Power
cord
STANDBY/ON button
POWER indicator