Cisco Systems 10000 Series Network Card User Manual


 
10-5
Cisco 10000 Series Routers Line Card Hardware Installation Guide
OL-6773-04
Chapter 10 1-Port Gigabit Ethernet Half-Height Line Card Overview
Physical Specifications
Note Because this line card operates in full-duplex mode, both the RX and TX LEDs can be on at the same
time.
Physical Specifications
The 1-port Gigabit Ethernet half-height line card physical specifications appear in Table 10-4.
LINK Green On Carrier detected; the port is able to pass traffic. This
LED can also be on if the line card is in internal
loopback.
Off No carrier signal is detected; the negotiation failed, or
the port is administratively down.
Table 10-3 LED Description(continued)
LED Label Color State Meaning
Table 10-4 1-Port Gigabit Ethernet Half-Height Line Card Physical Specifications
Description Specifications
Physical dimensions Height:7.8 in. (19.8 cm)
Depth:11 in. (27.9 cm)
Width: 1.3 in. (3.3 cm)
Shipping weight Approximately 2 lb (0.9kg)
Operating temperature 41
o
F to 104
o
F (5
o
C to 40
o
C)
Short-term operating temperature is limited to 131
o
F (55
o
C)
in compliance with Bellcore GR
Relative humidity Operating—nominal: 5% to 85%
Operating—short term: 5% to 90%
Storage: 5% to 95%
Storage temperature –40
o
F to 158
o
F (–40
o
C to 70C
o
)