Filter
Top Products
14-9
Cisco 12000/10720 v3.2 Router Manager User Guide
OL-6690-01
Chapter 14 Routing
BGP Configuration
Enable BGP Window—Detailed Description
Local Autonomous System—The id of the BGP process to be created on the
device.
Action
Enable BGP—Clicking on the Enable BGP button creates the BGP process on the
device.
Modifying BGP on a Chassis
The BGP Modify Window allows the user to modify the BGP Configurations on
the device. To modify a BGP process, proceed as follows:
Step 1 Open the BGP Configuration window. See “Viewing the BGP Details Tab on the
BGP Configuration Window” section on page 14-4 for further details.
Step 2 Choose a chassis from the left side of the window.
Note You can choose multiple chassis (from the chassis list) which allows you
to launch the BGP Modify window for the selected chassis.
Step 3 Click on the Modify button. The BGP Modify window appears.
Note The Modify button is active only when there is BGP running on the
device.