Cisco Systems 15454 Network Hardware User Manual


 
xxxvii
Cisco ONS 15454 SDH Reference Manual, R8.0
August 2012
October 2008 Updated the section “4.15.2 Ports and Line Rates” and “Table 4-17 Line Rate
Configurations Per 15454_MRC-12 Port, Based on Available Bandwidth” in
Chapter 4, Optical Cards.
November 2008
Updated the list of PM parameters for MRC-12 and MRC-4 cards in Chapter
16, Performance Monitoring.
Updated Server Trail section in Chapter 11, Circuits and Tunnels.
Updated the section “Compatibility by Card” in the chapter, “Optical Cards”.
January 2009 Updated the SFP and XFP Card Compatibility table in Chapter 4, Optical Cards.
March 2009
Added a note in section “5.11 CE-MR-10 Card” of Chapter 5, Ethernet Cards.
Updated the SFP and XFP Specifications table in Appendix A.
April 2009
Updated Figure 7-1 in Chapter 7, Card Protection.
Updated the "TCC2P Card Specifications" section in Appendix A.
Updated the Cisco ONS 15454 SDH bandwidth specifications section in
“A.1.1 Bandwidth” of Appendix A, Hardware Specifications.
Updated Table 11-13 and Table 11-14 in Chapter 11, Circuits and Tunnels.
May 2009
Updated the section “User Password, Login, and Access Policies” in Chapter
9, Security.
June 2009
Updated “STM-N Speed Upgrades” in Chapter 12, SDH Topologies and
Upgrades.
July 2009
Updated the table “PM Parameters for the STM-1 and STM1 SH 1310-8
Cards” in Chapter 15, Performance Monitoring.
Updated the section “CE-1000-4 Card” in Chapter 5, Ethernet Cards.
Added a new section, Comparison of the Protection Schemes in the chapter,
SDH Topologies and Upgrades.
November 2009
Updated the table “Line Rate Configurations Per 15454_MRC-12 Port, Based
on Available Bandwidth” in the chapter, “Optical Cards”.
January 2010 Updated the section “STM-N Speed Upgrades” in the chapter SDH Topologies
and Upgrades.
February 2010
Changed the BIEC parameter to BIT-EC in Chapter 15, “Performance
Monitoring”.
Updated the SFP/XFP Card Compatibility table for ADM-10G card in
chapter Transponder and Muxponder Cards.
April 2010
Updated the section “SNMP Overview” in the chaper “SNMP”.
August 2010
Updated the section “Bridge and Roll” in the chapter “Circuits and Tunnels”.
Removed the reference to G1000 card support in the chapters “Shelf and
FMEC Hardware”, “Network Element Defaults”, “Performance Monitoring”,
and “Ethernet Cards”.
November 2010 Updated the figure “ML1000-2 Faceplate and Block Diagram” under the section
“ML1000-2 Card” in the chapter “Ethernet Cards”.
Date Notes