Filter
Top Products
6
These antennas are supported on the 2602E:
Internal Antennas
The 2602I model access points are configured with up to four dual-band inverted-F antennas and two
2.4-GHz/5-GHz dual-band radios.
There are four antennas deployed inside the access point with one deployed on each corner of the
access point top housing. Each antenna covers both the 2.4 GHz and the 5 GHz bands with a single
feed line. The basic features are as follows:
• Dual-band inverted-F antenna for use in both the 2.4-GHz and 5-GHz bands.
• Antenna unit integrated into 2602I model access points.
• Peak gain is approximately 4 dBi in the 2.4-GHz band and approximately 4 dBi in the 5-GHz
band.
Regulatory Domains
The 2600 series supports the following regulatory domains (shown as “x” in the model numbers):
• -A, -C, -E, -I, -K, -N, -Q, -R, -S, -T, -Z
Countries Supported
Click this URL to browse to a list of countries and regulatory domains supported by the 2600:
www.cisco.com/go/aironet/compliance
Antenna Part Number Antenna Type Antenna Gain 2 GHz / 5 GHz
(dBi)
AIR-ANT2524DB-R Dual-resonant black dipole 2/4
AIR-ANT2524DW-R Dual-resonant white dipole 2/4
AIR-ANT2524DG-R Dual-resonant gray dipole 2/4
AIR-ANT2524V4C-R Dual-resonant, ceiling-mount omni
(4-pack)
2/4
AIR-ANT2544V4M-R Dual-resonant omni (4-pack) 4/4
AIR-ANT2566P4W-R Dual-resonant Directional antenna
(4-pack)
6/6