Cisco Systems 2600-DC Series Network Router User Manual


 
Cisco Systems, Inc.
All contents are Copyright © 1992–2004 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 16 of 20
WIC-1B-U-V2 1-port ISDN BRI with NT1 X X X
WIC-1AM
3
1-port Analog Modem interface card X X X
WIC-2AM
3
2-port Analog Modem interface card X X X
WIC-1ADSL-DG 1-port ADSL WAN Interface with Dying
Gasp
XX
WIC-1ADSL
4
1-port ADSL WAN Interface X X X
WIC-1ADSL-I-DG 1-port ADSLoISDN WAN Interface X X
WIC-1SHDSL-V2 1-port G.SHDSL WAN Interface with two or
four wire support
XX
WIC-1SHDSL
2
1-port G.SHDSL WAN Interface X X X
1. Requires Cisco IOS 12.0(5)XK or later.
2. Requires Cisco IOS 12.2(4)XL or later.
3. Requires Cisco IOS 12.2(2)XB or later and IOS IP Plus feature set.
4. Requires Cisco IOS 12.1(5)YB, 12.2(2)XK, 12.2(4)T or later.
Table 6 Voice Interface Cards for Use with the Voice/Fax Network Modules Module Voice Interface Cards
supported for use with the Voice/Fax NMs
Product Number Description Cisco 2612 Cisco 2600XM Cisco 2691
VIC-2BRI-S/T-TE
1
2-port BRI S/T terminal equipment voice/
fax interface card for voice/fax NM
XX X
VIC2-2BRI-NT/TE3 2-port BRI (NT and TE) Voice Interface
module
XX
VIC-2BRI-NT/TE3 2-port BRI (NT and TE) Voice Interface
module
XX X
VIC-2FXS 2-port FXS voice/fax interface card for
voice/fax NM
XX X
VIC2-2FXS 2-port FXS voice/fax interface card for
voice/fax NM
XX
VIC-4FXS/DID 4-port FXS voice/fax interface card. (Note:
The DID feature is not supported at this
time.)
XX
VIC-2FXO-M1
2
2-port FXO voice/fax interface card for
voice/fax NM w/ Caller ID & supervisory
disconnect (North American version and
other countries)
XX X
VIC-2FXO 2-port FXO voice/fax interface card for
voice/fax network module (North
American version and other countries)
XX X
Table 5 WAN Interface Cards for the Cisco 2600 Series Cisco 2600 Series WAN WICs (Continued)
Product Number Description Cisco 2612
Cisco
2600XM Cisco 2691