Filter
Top Products
11
Release Notes for the Catalyst 1900 and Catalyst 2820 Series Switches, Version 9.00.06
OL-2901-01
Caveats
Resolved Caveats in Previous Versions
These problems were resolved in version 9.00.05:
• CSCds09069
Catalyst 1900 and 2820 switches can now communicate with other management VLANs even if the
switch has no ARP entry in its ARP table for a default gateway or does not have a port assigned to
a management VLAN.
• CSCds60075
The MIB object IfLastChange now reports the correct time when the LinkUp/LinkDown Traps are
disabled on the switch.
• CSCdt65828
The FDDI DAS module no longer incorrectly appears as an SAS module in a Catalyst 2820 switch.
• CSCdr56930
The show cdp neighbor detail command now works correctly on the switch and no longer shows
only the IP address of the command switch.
• CSCds57774
The switch no longer fails when the HTTP server is enabled and a browser tries to access the URL
http://switch-ipaddr/anytext?/.
• CSCds77252
Catalyst 1900 and 2820 switches running Enterprise software release 9.00.05 can now answer
queries for the MIB object ipAdEntNetMask when you use the snmpget command.
• CSCdt33416
SNMP operations with null community strings are no longer allowed.
• CSCdv09114
If a switch is installed before the DHCP scope is configured on the DHCP server, or before the
DHCP server is online the switch now completes automatic configuration through TFTP.
• CSCdv11505
Catalyst 1900 and 2820 switches now respond to ARP requests in a redundant uplink configuration
where there are no access ports assigned to the management VLAN.
• CSCdv35159
Catalyst 1900 and 2820 switches no longer allow community strings ending with a numeral or an
@ symbol.
• CSCdu56824
Catalyst 1900 and 2820 switches no longer allow privileged EXEC access with a user EXEC
password.