Filter
Top Products
A-3
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
OL-1375-02
Appendix A Technical Specifications
Radio Specifications
Type Direct-sequence spread spectrum (DSSS)
IEEE 802.11b compliant
Power output
Note Refer to Appendix D for limitations on radiated power (EIRP) levels
in the European community and other countries.
Note If you are using an older version of a 340 or 350 series client adapter,
your power level options may be different than those listed here.
350 series 100 mW (20 dBm)
50 mW (17 dBm)
30 mW (15 dBm)
20 mW (13 dBm)
5 mW (7 dBm)
1 mW (0 dBm)
340 series PC card 30 mW (15 dBm)
1 mW (0 dBm)
340 series LM card 30 mW (15 dBm)
15 mW (12 dBm)
5 mW (7 dBm)
1 mW (0 dBm)
Operating frequency 2.400 to 2.497 GHz (depending on the regulatory
domain in which the client adapter is used)
Usable channels 2412 to 2484 MHz in 5-MHz increments
Interference rejection –35 dBc adjacent channel rejection
Data rates 1, 2, 5.5, and 11 Mbps
Modulation Binary Phase Shift Keying (BPSK) - 1 Mbps
Quaternary Phase Shift Keying (QPSK) - 2 Mbps
Complementary Code Keying (CCK) - 5.5 and
11 Mbps
Receiver sensitivity
350 series –94 dBm @ 1 Mbps
–91 dBm @ 2 Mbps
–89 dBm @ 5.5 Mbps
–85 dBm @ 11 Mbps
340 series –90 dBm @ 1 Mbps
–88 dBm @ 2 Mbps
–87 dBm @ 5.5 Mbps
–83 dBm @ 11 Mbps
Table A-1 Technical Specifications for the 340 and 350 Series Client Adapters (continued)