Filter
Top Products
1-6 Cisco 4000 Series Installation Guide
Series Specifications
Table 1-1 System Specifications
Software Compatibility
Network processor modules must be supported by the appropriate level of system software.
The minimum system software version for the original Cisco 4000 was Software
Release 9.1; for the Cisco 4000-M, Software Release 9.14; for the Cisco 4500, and
Cisco 4500-M, Cisco Internetwork Operating System (Cisco IOS) Release 10.2; for the
Cisco 4700-M, Cisco IOS Release 10.3(10). Table 1-2 lists the minimum system software
versions for network processor modules.
Description Specification
Dimensions (H x W x D) 3.4 x 17.6 x 17.7" (8.6 x 44.7 x 45 cm)
Weight 24 lb (10.9 kg) (including the chassis and network processor
modules)
Power 100–240 VAC, 50–60 Hz, 3.0–1.5A or 40–72 VDC, 5–2.8A
Wire gauge for DC-input
power connections
14 AWG
1
1. AWG = American Wire Gauge
Network interface options Ethernet, serial, Token Ring, FDDI, BRI, G.703, channelized
T1/PRI, channelized E1/PRI, ATM
Serial interfaces EIA/TIA-232, EIA/TIA-449
,
V.35, X.21, NRZ/NRZI, DTE/DCE,
EIA-530 DTE
Console port EIA/TIA-232 DB-25 female connector
Auxiliary port EIA/TIA-232 DB-25 male connector
Nonoperating temperature – 40–185°F (– 40–85°C)
Operating humidity 5–95%, noncondensing
Operating temperature 32–104°F (0–40°C)
Regulatory compliance FCC Class A, FCC Part 68, Canadian DOC Class A, CS-03, UL
1950 2nd edition, CAN/CSA 950-M93, EN60950 with
Amendments 1 and 2, AN/NZS 3260, NOM 019
Additional regulatory compliance is in the Cisco 4000 Series Public
Network Certification document that shipped with your router.)