Filter
Top Products
7
6 Threaded Hole Racks
Using a Phillips head screwdriver, remove the square hole insert
from the rear of the rail.
Remove the square hole insert from the front of the rail.
Align the threaded hole bracket to the front of the rail over
the hooks. Secure it with the threaded hole standoff using a
flat-head screwdriver.
No additional hardware is necessary for the rear adapter.
Repeat these steps page for the other slide rail. Go to the“Attach
the Outer Slide Rail to Threaded Hole Racks” section on
page 9.
330884
330882
D
E
330878
330876