Cisco Systems 720P Webcam User Manual


 
7
Cisco TelePresence PrecisionHD Camera PrecisionHD Camera User guide
D14640.09 PrecisionHD 1080p-720p Camera User Guide, June 2012.
© 2010-2012 Cisco Systems, Inc. All rights reserved.
www.cisco.com
The PrecisionHD Camera 1080p4x
Available with the Cisco TelePresence Quick Set C20.
The orange LED illuminates while in
a call and ickers when there is an
incoming call.
The green LED is continuously
illuminated when power is On,
but it ickers when receiving
signals from the remote control.
USB
HDMI
Video Out
Power
Supply
Camera
Control
HDMI and Camera Control
HDMI video out
• HDMI is the video out source.
• PrecisionHD 1080p4x: Maximum resolution is
1080p30/720p60.
Camera control
Camera control is used for controlling the pan, tilt and
zoom, and for powering up the camera.
Daisy-chain control is not supported. The camera can be
used in a chain of multiple cameras but must be the last
camera in the chain.
Power
Use the supplied power adapter when connecting the
power.
USB
For future use.
Kensington lock
The Kensington lock may be used to prevent the camera to
be moved from its place or to prevent theft.
Kensington lock
The Quick Set C20 is shipped with the PrecisionHD
1080p 4x camera.
NOTE: The early shipments of the Quick Set C20
came with an interim version of the PrecisionHD
1080p4x camera (the PrecisionHD 1080p4x*
camera).
* Available for a limited period of time. See the “Technical
specications” on page 32 section for details.
CAUTION! Do not pan or tilt the PrecisionHD 1080p4x
camera by hand!
Contents
Appendices
Introduction
The physical interface
Connecting the camera
Video output formats
Daisy chaning
The physical interface