Filter
Top Products
43
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
OL-10362-06
Supported Hardware
• Any mix of POS, ATM, CEoP and serial SPAs up to an aggregate of OC-48
• One SPA-2X1GE SPA plus POS, ATM, CEoP, or Serial SPAs up to an aggregate of OC-24
• Two SPA-2X1GE SPAs
• Two SPA-5X1GE-V2 SPAs (oversubscribed)
• One SPA-1X10GE-L-V2 SPA (oversubscribed)
Refer to Shared Port Adapters (SPAs), page 43 for the minimum release required to support each SPA
type.
Shared Port Adapters (SPAs)
These sections describe SPAs:
• Ethernet SPAs, page 43
• POS SPAs, page 45
• ATM SPAs, page 46
• Serial SPAs, page 47
• Circuit Emulation over Packet (CEoP) SPAs, page 48
Ethernet SPAs
These sections describe Ethernet SPAs:
• Ten Gigabit Ethernet SPAs, page 43
• Gigabit Ethernet SPAs, page 44
• Fast Ethernet SPAs, page 45
Ten Gigabit Ethernet SPAs
Product ID
(append “=” for spares) SIP Support Product Description
Minimum
Software Version
SPA-1XTENGE-XFP
7600-SIP-600 1-port 10 Gigabit Ethernet SPA, LANPHY XFP Optics 12.2(33)SRA
SPA-1XTENGE-XFP-V2
7600-SIP-600 1-port 10 Gigabit Ethernet SPA, LANPHY XFP Optics 12.2(33)SRA
SPA-1X10GE-L-V2
7600-SIP-600 1-port 10 Gigabit Ethernet SPA, SFP Optics 12.2(33)SRA
SPA-1X10GE-L-V2
7600-SIP-400 1-port 10 Gigabit Ethernet SPA, SFP Optics 12.2(33)SRC
XFP Modules Supported in
SPA-1XTENGE-XFP
XFP-10GLR-OC192SR 12.2(33)SRA
XFP-10GER-OC192IR 12.2(33)SRA
XFP-10GZR-OC192LR 12.2(33)SRB1
DWDM-XFP modules supported in SPA-1X10GE-L-V2 on SIP-600.
DWDM-XFP-30.33 12.2(33)SRB3
DWDM-XFP-31.12 12.2(33)SRB3
DWDM-XFP-31.90 12.2(33)SRB3