Filter
Top Products
7
Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers
78-10368-03
Connecting Cables to the Router
Connecting a Hub
Step 1 Connect the yellow cable to one of the following ports:
• The yellow Ethernet port on your Cisco 802 IDSL router.
• Any of the yellow Ethernet ports on your Cisco 804 IDSL router.
Step 2 Connect the other end of the cable to the hub.
Step 3 Check the LED corresponding to the connected port after router power-up:
• The LINK LED is on the Cisco 802 IDSL back panel.
• ETHERNET 1, 2, 3, and 4 LEDs are on the Cisco 804 IDSL front panel.
Step 4 If the LED corresponding to the connected port is not on, do the following:
• If the LINK or ETHERNET 1 LED is not on, try pressing the TO HUB/TO PC button.
• If the ETHERNET 2, 3, or 4 LED is not on, press the equivalent of the router TO HUB/TO PC button
on your hub.
Cisco 804 IDSL Router
TO HUB
TO PC
Cisco 804 IDSL
4
3
2
1
ETH
ER
NE
T
10 B
A
SE T
CON
S
O
LE
Cisco Micro Hub 10/100
1
SPEED
100BaseTX
10BaseT
LED
SOLID
BLINK
2
3
4
5
6
7
8
M
D
I M
D
I-X
5
X
6
X7
X8
X
1
X
2
X
3
X
4
X
1
0
/1
0
0
IDSL
+5, -24, -71 VDC