Filter
Top Products
7
8 Connect the Power and Turn On the Router
Follow these steps to connect power to the Cisco 805 router and turn it on:
Figure 4 Connecting the Power to a Cisco 805 Router
Step 1 Make sure the router power is off.
Step 2 Set the power switch to the STANDBY ( ) position.
Step 3 Connect the power supply cable to the 6-pin connector on the router.
Step 4 Connect the power cord to the desktop power supply.
Step 5 Connect the other end of the power cord to an electrical outlet.
Step 6 Turn ON the router. Press the power switch to on (|).
H
U
B
LIN
K
N
O
H
U
B
CONSOLE
ETHERNET
SERIAL
Cisco 805
10 BASE T
Desktop power supply
6-pin connector
To electrical
outlet