Filter
Top Products
1-9
Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide
OL-16193-01
Chapter 1 Product Overview
Hardware Features
• Wireless LAN Connectivity
• Feature Summary
Kensington Lock
A Kensington security slot is located on the router back panel. To secure the router to a desktop or other
surface, use the Kensington lockdown equipment.
Reset Button
The Reset button resets the router configuration to the default configuration set by the factory. To reset
the hardware and its embedded wireless access point, simultaneously press the reset button while
applying power to the router.
Note When you reset the hardware when the embedded wireless access point is running Cisco Unified IOS
software, the router will shutdown but the access point will continue running. Clients with
Cisco
Unified IOS software are controlled by a Wireless LAN Controller (WLC) and can only be reset
by the controller.
LEDs
The LEDs are located on the front panel of the router. Table 1-1 describes the LEDs for the Cisco 860
series and the Cisco 880 series ISRs.
Table 1-1 LED Descriptions for the Cisco 860 Series and Cisco 880 Series ISRs
LED Color Description 860 Series 880 Series
Power OK Green On—DC power is being supplied to the router and the
Cisco
IOS software is running.
Blinking—Bootup is in process, or the router is in ROMMON
monitor mode.
Off—Power is not supplied to the router.
All models All models
Link Status FE
1
0 Green On—Ethernet port is connected.
Blinking—Data is either being received or being transmitted.
Off—Ethernet port is not connected.
All models All models
Link Status FE1
Link Status FE2
Link Status FE3
FE WAN Port Link
Status
Green On—Port is connected.
Blinking—Data is either being received or being transmitted.
Off—Port is not connected.
861 models 881 models