Cisco Systems Catalyst 8510 Network Card User Manual


 
Specifications and Regulatory Compliance Information
Description Specifications
Switch and processor
capacity
10-Gbps shared memory, nonblocking switch fabric up to 32
KB frames
Dimensions (H x W x D) Chassis: 10.4 x 17.25 x 18.4 in (26.4 x 43.1 x 46.0 cm)
Processor card and carrier module:
1.2 x 14.4 x 16 in (3.0 x 36.6 x 40.6 cm)
Port adapter: 1.2 x 6.5 x 10 in (3.0 x 16.5 x 25.4 cm)
Power supply: 2.7 x 6.0 x 15.3 in (6.9 x 15.2 x 38.9 cm)
Weight Empty chassis: 32 lb (15.5 kg)
Fully populated chassis: approximately 130 lb (59.09 kg)
AC power supply: 11 lb (4.98 kg)
DC power supply: 10 lb (4.54 kg)
Airflow 95 cfm through the system fan assembly
Operating temperature 32 to 122 F (0 to 50 C)
Nonoperating temperature
40 to 167 F (40 to 75 C)
Humidity 10 to 90%, noncondensing
Altitude
500 to 10,000 ft (52 to 3048 m)
Microprocessor 100-Mhz MIPS R4700
AC total output 388W maximum
AC-input voltage 100-240 VAC wide input with power factor correction
AC frequency Auto sensing limits: 100 to 127/200 to 240 VAC, 8/4A, 47 to
63 Hz
AC current rating 8/4A with the chassis fully populated
Power supply load 376W maximum configuration, 200W typical with max
configuration
DC voltages supplied and
steady-state maximum
current ratings
System: +5V @ 70A
+12V @ 2A
+24V @ 0.2A
Processor: +5V @ 15A
+24V @ 25mA
+12V @ 500mA
°°
°°
Description Specifications
Memory 8-MB Flash memory SIMM (upgradable to 16 MB)
64-MB DRAM
256-KB boot EPROM
128-KB SRAM
No Flash PC card installed by default (accepts 8-, 16-, or
20-MB Intel Series 2+ Flash PC cards)
Regulatory Compliance UL 1950 (U.S.A.)
CSA 950 (Canada)
EN60950 (European Union)
IEC 950 (International)
AS/NZS 3260 (Australia/New Zealand)
TS001:1997 (Australia)
21CFR1040 (Laser - U.S.A.)
EN60825 (Laser - European Union)
IEC60825 (Laser - International)
CE Marking (European Union)
FCC Part 15 (CFR 47) Class A (U.S.A.)
VCCI Class A with UTP and Class B with FTP cables (Japan)
EN55022 Class A with UTP and Class B with FTP cables
(European Union)
CISPR 22 Class A with UTP and Class B with FTP cables
(International)
AS/NZS 3548 Class A with UTP and Class B with FTP cables
(Australia/New Zealand)