Filter
Top Products
17
Cisco 40-Gigabit and 100-Gigabit CFP Transceiver Modules Installation Note
OL-23946-01
Removing the CFP Transceiver
If you need to remove a CFP transceiver, follow these steps:
Step 1 Disconnect the network fiber-optic cable from the CFP transceiver connectors. Immediately reinstall the
dust plugs in the CFP transceiver optical bores.
Step 2 Loosen the two captive installation screws that secure the CFP to the networking module.
Step 3 Slide the CFP transceiver out of the module socket. (See Figure 9.) Immediately place the CFP
transceiver in antistatic protective packaging.
Figure 9 Removing a CFP Transceiver Module
281589
L
I
NK
Captive installation
screws
Optical bore
dust plugs