Filter
Top Products
15
Cisco 12016, Cisco 12416, and Cisco 12816 Router Unpacking Instructions
78-16081-02
Unpacking the Router
Step 3 Use the 3/4-inch (19-mm) socket and ratchet wrench to turn the scissor-jack screw
counterclockwise to expand the scissor-jack platform and lower the base of the
scissor-jack platform to the floor (Figure 9).
Continue turning the screw until the platform supports the weight of the router and
barely begins to lift the pallet.
Figure 9 Expanding the Scissor-Jack Platform to Support the Router
Step 4 Remove the bolts that fasten the remaining six hold-down brackets to the top of
the pallet body (see Figure 4 on page 10).
Caution At this point, the weight of the chassis is supported by the scissor-jack platform.
Have one person hold the chassis to ensure that it is stable.
Step 5 Slide the pallet body away from the base of the scissor-jack platform and set it
safely aside (see Figure 5 on page 11).
Warning
Do not attempt to lift the chassis with the handles on the back and sides of the
router chassis. These handles are not designed to support the weight of the
chassis, and should be used only to steady and guide the chassis while it is
being inserted into or removed from an equipment rack. To reduce the risk of
damage to the chassis and serious bodily injury, do not use these handles to lift
or support the chassis.
29941
SLOT-0
SLOT-1
RESET
AUX
CONSOLE
EJECT
ACTIVE
0
CARRIER
RX CELL
ACTIVE
CARRIER
RX PKT
DOWN
LOOPRALA
CDHNTCD
TX
0
RX
TX
1
RX
TX
2
RX
TX
3
RX
TX
4
RX
TX
5
RX
TX
6
RX
DOWN
LOOPRALA
CDHNTCD
TX
0
RX
TX
1
RX
TX
2
RX
TX
3
RX
TX
4
RX
TX
5
RX
ACTIVE
0
CARRIER
RX PKT
ACTIVE
1
CARRIER
RX PKT
ACTIVE
2
CARRIER
ACO/LT
CRITICAL
MAJOR
MINOR