Filter
Top Products
4
Configuring Gigabit Ethernet Enhanced High-Speed WAN Interface Cards
OL-24318-02
Configuring the EHWIC 1 GE-SFP-CU
LEDs
Table 1 lists the LEDs and describes their functionality and different states. The LEDs provide a visual
indication of your available services.
Table 1 LED Indicators
Configuring the EHWIC 1 GE-SFP-CU
This section describes how to configure your EHWIC 1 GE-SFP-CU.
SUMMARY STEPS
1. enable
2. configure terminal
3. interface type slot/subslot/port number
4. ip address ip-address mask
5. shutdown
6. no shutdown
7. exit
LED Color Description
SFP EN Off Not present.
Green Present and enabled.
Amber Present with failure.
ACT Solid or blinking green Blinks proportional to valid Ethernet traffic.
Off No packet transfers are occurring.
LNK Green Solid green indicates the Ethernet port has a
link partner.
SPD Off No link.
Green Note Blink indicates port speed.
blinking 1 blink before pause—10 Mbps link speed.
2 blinks before pause—100 Mbps link speed.
3 blinks before pause—1000 Mbps link speed.