CHAPTER
1-1
Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
OL-4234-05
1
Overview of Cisco IAD2430 Series IADs
This chapter provides a brief description of Cisco IAD2430 series integrated access devices and contains
the following sections:
• Overview, page 1-1
• Cisco IAD2430 Series Deployment, page 1-6
• Interfaces and Service Capabilities, page 1-7
• Physical Description and LEDs, page 1-9
• Specifications, page 1-11
• Software Elements, page 1-12
Overview
The Cisco IAD2430 series integrated access devices (IADs) aggregate multiple channels of data and
voice or fax user-side traffic for transport over single or multiple wide-area network (WAN) uplinks.
Voice or fax traffic is transported by Voice over Internet Protocol (VoIP) or by Voice over Asynchronous
Transfer Mode (VoATM). All platforms support Media Gateway Control Protocol (MGCP), the signaling
protocol H.323, and Session Initiation Protocol (SIP).
Cisco IAD2430 series IADs support the following interfaces:
• 10/100BASE-T LAN connection
• T1/E1 port connections
• RJ-21 analog voice interface
• WIC/VIC options
• External/Internal compact flash
Cisco IAD2430 series IADs can be housed in a rack, mounted on a wall, or set on a benchtop surface.
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means by security.
Statement
1017