Filter
Top Products
Chapter 2. Message and Recovery Procedures 39
SW_VLAN Messages
This section contains the VLAN manager messages. The VLAN manager receives
information from the VTP and enables the proper VLAN membership on all
interfaces through the port manager.
SW_VLAN-3-VLAN_PM_NOTIFICATION_FAILURE: VLAN Manager synchronization failure with Port Manager over
[chars].
Explanation This message means that the VLAN manager dropped a notification from the port manager
because of a lack of ready pool space. [chars] is the type of port manager notification.
Response Find out more about the error by using the show tech-support privileged EXEC command and
by copying the error message exactly as it appears on the console or system log and entering it in the Output
Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For more information about these
online tools , see the “Error Message Traceback Reports” section on page 9.
SW_VLAN-3-VTP_PROTOCOL_ERROR: VTP protocol code internal error:[chars].
Explanation This message means that the VTP code encountered an unexpected error while
processing a configuration request, a packet, or a timer expiration. [chars] is the internal error.
Response Find out more about the error by using the show tech-support privileged EXEC command and
by copying the error message exactly as it appears on the console or system log and entering it in the Output
Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For more information about these
online tools , see the “Error Message Traceback Reports” section on page 9.
SW_VLAN-4-BAD_PM_VLAN_COOKIE_RETURNED: VLAN manager unexpectedly received a bad PM VLAN
cookie from the Port Manager, VLAN indicated:[dec].
Explanation This message means that the VLAN manager received an upcall and a VLAN cookie from
the port manager, which translated to a bad VLAN number. [dec] is the VLAN ID.
Response Find out more about the error by using the show tech-support privileged EXEC command and
by copying the error message exactly as it appears on the console or system log and entering it in the Output
Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For more information about these
online tools , see the “Error Message Traceback Reports” section on page 9.
SW_VLAN-4-BAD_STARTUP_VLAN_CONFIG_FILE: Failed to configure VLAN from startup-config. Fallback to use
VLAN configuration file from non-volatile memory.
Explanation This message means that the VLAN software did not use the VLAN configuration from the
startup-configuration file. It will use the binary VLAN configuration file in NVRAM.
Response No action is required.