Filter
Top Products
44
Regulatory Compliance and Safety Information for Cisco IP/VC 3500 Products (Release 3.0 and Release 4.0)
78-14912-03
Safety Information
Statement 294—Class A Warning for Korea
Safety Information
This section includes translations in multiple languages of the warnings that may appear in the
Cisco IP/VC product documents. Before working on equipment, be aware of the hazards involved with
electrical circuitry and standard safety practices to prevent accidents.
Telecom Approvals Listing
The Cisco IP/VC 3521 BRI Gateway and Cisco IP/VC 3540 PRI Gateway products meet the
requirements listed in this section for telecommunications equipment.
FCC Part 68 Notice
The Cisco IP/VC 3521 BRI Gateway and Cisco IP/VC 3540 PRI Gateways comply with Part 68 of the
FCC rules. See Table 2 for FCC Part 68 approval details for the equipment. On the bottom of this
equipment is a label that contains, among other information, the FCC registration number. If requested,
this information must be provided to the telephone company.
An FCC-compliant telephone cord and modular plug is provided with this equipment, designed to be
connected to the telephone network or premise wiring using a compatible modular jack that is Part 68
compliant.
This equipment cannot be used on telephone company provided coin service. Connection to party line
service is subject to state tariff.
If this equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. If advance notice isn’t practical, the
telephone company will notify the customer as soon as possible. Also, you will be advised of your right
to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that
could affect the operationof the equipment. Ifthat happens, the telephonecompany will provide advance
notice in order for you to make the necessary modifications in order to maintain uninterrupted service.
Warning
This is a Class A Device and is registered for EMC requirements for industrial use. The seller or
buyer should be aware of this. If this type was sold or purchased by mistake, it should be replaced
with a residential-use type.