Filter
Top Products
2
Cisco ME 3600X-24CX Switch Getting Started Guide
OL-27508-01
About this Guide
About this Guide
This guide provides instructions on how to install and configure your Cisco Metro Ethernet (ME) 3800X
and ME 3600X switch. Also covered are switch management options, basic rack-mounting procedures,
port and module connections, and troubleshooting help.
For more installation and configuration information, see the Cisco ME 3800X and ME 3600X switch
documentation on Cisco.com. For system requirements, important notes, limitations, open and resolved
bugs, and last-minute documentation updates, see the release notes, also on Cisco.com.
When you use the online publications, refer to the documents that match the Cisco IOS software version
that is running on the switch. Look on the switch rear panel to locate the software version or enter the
show version command from the CLI.
For translations of safety warnings that appear in this publication, review the warnings in the Regulatory
Compliance and Safety Information for the Cisco ME 3600X-24CX Switch on Cisco.com.
Box Contents
Note Verify that you have received these items. If any item is missing or damaged, contact your Cisco
representative or reseller for instructions.
1 Cisco ME 3600X-2CX switch 6 Two 19-inch mounting brackets
2 Product documentation and compliance document 7 Cable guide and screw
3 AC power cord 8 Four number-12 pan head screws
4 Power cord bail and bushing 9 Four number-8 Phillips truss-head screws
5 Ground lug 10 Eight number-8 Phillips flat-head screws
1
10
9
8
7
6
5
4
3
2
333304
Product
Documentation
and Compliance