Cisco Systems MGX-FRSM-2CT3 Network Router User Manual


 
Configuring Frame Relay Service
Cisco MGX 8850 Installation and Configuration, Release 1.1.00, Part Number 78-6186-02
6-28
Table 6-2 Supported Lines rates on the MGX-FRSM-HS1/B
The possible errors for cnfln are:
One or more parameters are invalid.
Line does not exist (has not been added).
Loopback or BERT is on.
An active port already exists on this line.
Step 4 If the logical port does not exist or is not the appropriate type (Frame Relay, FUNI, or
frame forwarding), execute addport to create the appropriate type of port. If the logical
port already exists and needs no modification (cnfport), you can add connections by
performing the tasks in “Adding a Frame Relay Connection.” The parameters for
addport depend on the type of FRSM:
For MGX-FRSM-2T3, MGX-FRSM-2E3, or MGX-FRSM-HS2/B:
addport <port_num> <line_num> <port_type>
port_num is the logical port number in the range 1–2. The mapping between a logical
port and a line is one-to-one for these cards. Note that the maximum committed
information rate (CIR) on each line for these cards is 0-44210000 bps for
MGX-FRSM-2T3, 0-34010000 bps for MGX-FRSM-2E3, and 0-51840000 bps for
MGX-FRSM-HS2. Specify CIR with addcon (or addchan if necessary).
line_num is the physical line number in the range 1–2.
port_type is a number representing the mode of operation for the logical port:
1 for Frame Relay; 2 for FUNI mode-1a; or 3 for frame forwarding.
For an MGX-FRSM-2CT3:
addport <port_num> <line_num> <ds0_speed> <begin_slot> <num_slot>
<port_type>
port_num is the logical port number in the range 1–256. When you subsequently add
a connection through the preferred command addcon or the addchan command
(which requires NSAP format), you must indicate a logical port by using this singular
port_num regardless of the number of DS0s. (You can add 1–24 DS0s to a single
port_num through the other addport parameters.)
1–50 Correspond to Line Rates in Kbps.
1=48000 2=56000 3=64000 4=112000 5=128000
6=168000 7=192000 8=224000 9=256000 10=280000
11=320000 12=336000 13=384000 14=392000 15=448000
16=512000 17=768000 18=1024000 19=1536000 20=1544000
21=1792000 22=1920000 23=1984000 24=2048000 25=3097000
26=3157000 27=4096000
28=4645000 29=4736000 30=6195000
31=6315000 32=7744000 33=7899000 34=8192000 35=9289000
36=9472000 37=10240000 38=10890000 39=11059000 40=12390000
41=12629000 42=13897000 43=14222000 44=14336000 45=15488000
46=15799000 47=16384000 48=20025000 49=2498600 50=52000000