Filter
Top Products
xvi Cisco MGX 8800 Series Switch Command Reference
Cisco WAN Switching Product Name Change
Cisco WAN Switching Product Name Change
The Cisco WAN Switching products have new names. The BPX switch is now called the Cisco
BPX® 8620 wide-area switch. The AXIS shelf is now called the Cisco MGX™ 8220 edge
concentrator. Any switch in the IGX switch family (IGX 8, IGX 16 and IGX 32 wide-area switches)
is now called the Cisco IGX™ 8400 series wide area switch. The IGX 8 switch is now called the
Cisco IGX™ 8410 wide area switch. The IGX 16 switch is now called the Cisco IGX™ 8420
wide-area switch, and the IGX 32 switch is now called the Cisco IGX™ 8430 wide-area switch.
Cisco StrataView Plus is now called the Cisco WAN Manager or CWM.
Organization
The body of this publication is:
Related Documentation
The following Cisco publications contain additional information related to the operation of the Cisco
WAN switching network:
• Release 9.3 of the Cisco WAN Manager (formerly StrataView Plus) network management system
documentation set including:
— Cisco WAN Manager Installation and Configuration; providing a general description and
configuration and installation instructions for the Cisco WAN Manager (formerly
StrataView Plus) network management system.
— Cisco WAN Manager Operations; providing procedures for using the Cisco WAN Manager
(formerly StrataView Plus) network management system.
• The Cisco WAN Switch documentation set including:
— Cisco MGX 8850 Installation and Configuration; providing a general description and
configuration and installation instructions for the Cisco MGX 8850 wide area edge switch.
— Cisco BPX 8600 Series Installation and Configuration; providing a general description and
configuration and installation instructions for the Cisco BPX 8600 series broadband
switches.
— Cisco BPX 8600 Series Reference; providing a general description and technical details of
the Cisco BPX 8600 series broadband switches.
— Cisco IGX 8400 Series Installation and Configuration; providing a general description and
configuration and installation instructions for the multi-band Cisco IGX 8400 series nodes.
— Cisco IGX 8400 Series Reference; providing a general description and technical details of
the multi-band Cisco IGX 8400 series switches.
Chapter 1 MGX 8800 Series Command Line Interface
Provides a list of commands for the common equipment cards and the service modules
for the Cisco MGX 8800 series wide area edge switch.
Chapter 2 Configuration Sequences
Provides a list of basic configurations for specific module types.