Filter
Top Products
Add Computer Associates Attributes to the NAC Database
10 Installation Guide
Add Computer Associates Attributes to the NAC Database
Before you can define policies for Computer Associates posture attributes, you
must first add the attribute/value pairs to the Cisco Secure ACS NAC database.
Note: The following procedure assumes Cisco Secure ACS 3.3 is installed at:
C:\Program Files\CiscoSecure ACS v3.3
To add Computer Associates attributes to the Cisco Secure ACS NAC database,
follow these steps:
1. Go to the Computer Associates SupportConnect website,
http://supportconnect.ca.com, and locate the eTrust Agent for Cisco NAC.
2. Download the eTrust Agent for Cisco NAC to a system typically used for
network management tasks.
3. Extract the contents of the downloaded zip file to a temporary directory,
such as C:\Temp.
4. On the Cisco Secure ACS 3.3 for Windows system, copy the file cai-pp.txt to:
C:\Program Files\CiscoSecure ACS v3.3\Utils
The cai-pp.txt file contains the attribute/value pairs for NAC-enabled
Computer Associates applications.
5. From the C:\Program Files\CiscoSecure ACS v3.3\Utils directory, run the
following command:
CSUtil.exe -addavp cai-pp.txt
The CSUtil.exe program adds the attribute/value pairs to the Cisco Secure
ACS NAC database.
Use the Cisco Secure ACS user interface to configure policies for Computer
Associates products. For instructions, refer to the Cisco document NAC User
Guide for Cisco Secure ACS 3.3.
Install the Cisco Trust Agent
Install the Cisco Trust Agent on all end-point devices, such as desktop
computers, workstations, laptops, and servers that connect to or use network
resources. Download and install the Cisco Trust Agent 1.0 from the Cisco
website, http://www.cisco.com.