Cisco Systems OL-5512-01 Network Router User Manual


  Open as PDF
of 6
 
CHAPTER
6-1
Cisco WAN Access Performance Management System User Guide, 2.1
OL-5512-01
6
Adding Cisco IOS Routers to Cisco WAPMS
This chapter explains how to add Cisco IOS-based routers to Cisco WAPMS using the Network
Configuration application in the PAC.
For more information about using Network Configuration, see Chapter 3, “Network Configuration,” in
the Cisco WAN Access Performance Management System Client User Guide, 2.1.
The following topics are discussed in this chapter:
• “Adding Routers in Network Configuration”
• “Configuring ATM and Frame Relay Circuits” section on page 6-5.
Note Throughout the Cisco WAPMS documentation, the term ASE refers to Cisco routers running
SAA-ATM/FR and/or Visual Networks ASE probes.
Adding Routers in Network Configuration
In order for Cisco WAPMS to recognize Cisco routers, you must add them to your network using the
Cisco WAPMS PAC Network Configuration Toolset. All configuration tasks for networks, sites, access
lines, ASEs (and routers), and circuits are initiated from the Network Configuration window. See
Figure 6-1.
next