Cisco Systems PA-4B-U Network Router User Manual


 
vi
PA-4B-U Basic Rate Interface Port Adapter Installation and Configuration
OL-3521-02
Preface
Organization
Organization
This document is organized into the following chapters:
Related Documentation
Your router and the Cisco IOS software running on it contain extensive features and functionality, which
are documented in the following resources:
Cisco IOS software:
For configuration information and support, refer to the modular configuration and modular
command reference publications in the Cisco IOS software configuration documentation set that
corresponds to the software release installed on your Cisco hardware.
Note You can access Cisco IOS software configuration and hardware installation and maintenance
documentation on the World Wide Web at http://www.cisco.com,
http://www-china.cisco.com, or http://www-europe.cisco.com.
Cisco 7100 series routers:
For an online directory to quickly access documents for Cisco 7100 series routers, refer to the
Cisco 7100 Series Documentation roadmap at the following URL:
http://www.cisco.com/en/US/products/hw/vpndevc/ps333/products_product_index09186a008
00fa142.html
For hardware installation and configuration information refer to the Cisco 7100 Series VPN
Router Installation and Configuration Guide.
For information on setting up a Virtual Private Network, refer to the Cisco 7100 Series VPN
Configuration Guide.
Section Title Description
Chapter 1 Overview Describes the PA-4B-U port adapter and its LED displays, cables,
and receptacles.
Chapter 2 Preparing for Installation Describes safety considerations, tools required, and procedures
you should perform before the actual installation.
Chapter 3 Removing and Installing Port Adapters Describes the procedures for installing and removing PA-4B-U
port adapters in the supported platforms.
Chapter 4 Configuring the PA-4B-U Interfaces Provides instructions for configuring the PA-4B-U on the
supported platforms.