Cisco Systems S170 Computer Hardware User Manual


 
6
5 Round Hole Racks
Using a Phillips head screwdriver, remove the square insert from
the rear of the rail. Keep the two Phillips head screws.
Remove the square insert from the front of the rail. Keep the
two Phillips head screws.
Align the round hole insert to the rear of the rail, and secure
it with two of the saved screws.
Align the round hole insert to the front of the rail over the
hooks, and secure it with two of the saved screws.
See “Attach the Outer Slide Rail to Round and Square Hole
Racks” on page 8.
330884
330882
C
330881
C
330880