Filter
Top Products
1
1
Topspin 120 Quick Start
The following sections appear in this chapter:
• “Prepare the Site” on page 1
• “Mount the Chassis in a Rack” on page 1
• “Configure Basic Connectivity” on page 6
• “Configure and Connect InfiniBand Hosts” on page 7
Prepare the Site
Read the cautionary statements in “Safety Information” on page v.
Register the InfiniBand system online. Go to http://topspin.com/support/
.
Ground yourself using an approved ground wrist-strap.
Make sure you have the right cables and sufficient ventilation.
Unpack the Topspin 120 package.
Prepare a management workstation, such as a PC running a terminal program, and a straight-through
M/F DB-9 serial cable (included).
Mount the Chassis in a Rack
This section describes how to install the Topspin 120 chassis in an equipment rack.
Requirements
In addition to the accessories provided with the switch, you should have the following:
• A #1 Phillips screw driver
• 12 screws (provided)