Filter
Top Products
15
Configuration Using the Console Interface
24/48-Port 10/100 + 4-Port Gigabit Smart Switch with Resilient Clustering Technology and PoE
Chapter 4
Unit The unit number of the switch, from 1 to 6.
MAC Address The MAC address of the switch.
Software The version number of the software that runs
the switch.
Uplink The ID number of the switch that has an uplink
connection to this switch.
Downlink The ID number of the switch that has a
downlink connection from this switch.
Status The status of the switch, either master or slave.
ID After Reset The ID number that the Switch will have
after the next system reset. Values are Auto or 1 to 6.
Back to Main Menu
Select Back to Main Menu to exit the System Configuration
Menu and return to the Main Menu screen.
Port Status Menu
The Port Status Menu displays three options: Port Status,
PoE Status, and Back to Main Menu.
Port Status Menu
Port Status
The Port Status screen displays the following status
information for each of the switch’s ports: port number,
port status, link status, speed and duplex mode, and flow
control status. This screen is read-only; to change a port’s
settings, use the Port Configuration screen.
Port Status
PoE Status
The PoE Status screen displays the following status
information for each of the switch’s PoE ports: port number,
port status, power allocation, and power consumption.
This screen is read-only; to change a port’s PoE settings,
use the Port Configuration screen.
PoE Status
Port Configuration
The Port Configuration Menu displays three options: Port
Settings, PoE Settings, and Back to Main Menu.
Port Configuration Menu
Port Configuration
The Port Configuration screen allows you to change a
port’s settings. You can enable or disable a port, or set
its auto-negotiation status, speed and duplex mode, and
flow control status.
Port Configuration