Filter
Top Products
1-5
Cisco 837 Router and Cisco SOHO 97 Router Cabling and Setup Quick Start Guide
78-14782-07
Chapter 1 Cisco 837 Router and Cisco SOHO 97 Router Cabling and Setup
Configure the Router
CRWS Configuration Instructions
If you did not receive the Cisco Router and Security Device Manager (SDM) Quick Start Guide,
Cisco Router Web Setup (CRWS) is loaded on your router. These instructions show you how to
configure your router using CRWS. The CRWS software runs on Netscape versions 3.0 through 4.7, and
on Internet Explorer version 4.0 or later.
The Cisco Router Web Setup (CRWS) software is loaded on the router and should be used to configure
the router to connect to the Internet. The CRWS software runs on Netscape version 3.0 through 4.7, and
on Internet Explorer version 4.0 or later. Follow these steps to start the CRWS software and configure
the router:
Step 1 Start, or restart, a PC connected to one of the router Ethernet ports (1, 2, 3, or 4).
Step 2 Open a web browser. Make sure that the browser is set to work in online mode.
• In Internet Explorer, click the File menu, and verify that the “work offline” option is unchecked.
• In Netscape, the default selection in the File menu is set to work online.
Step 3 Type in the universal resource locator (URL) shown in Figure 1-3.
Figure 1-3 Type in the URL http://10.10.10.1
The CRWS dashboard (Figure 1-4) should appear after one or two minutes.