Filter
Top Products
3-10
Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide
OL-5916-01
Chapter 3 Installing Cisco uBR7100 Series Universal Broadband Routers
Connecting the Console Port and Auxiliary Port
Connecting the Console Port and Auxiliary Port
The router arrives with a console and auxiliary cable kit, which contains the cable and adapters you need
to connect a console (an ASCII terminal or PC running terminal emulation software) or modem to the
router. The console and auxiliary cable kit includes:
• RJ-45-to-RJ-45 rollover cable
• RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL)
• RJ-45-to-DB-25 male DCE adapter (labeled MODEM)
Note For more information, see the “Console and Auxiliary Port Cables and Pinouts” section on page C-2.
Connecting to the Console Port
Use the console terminal for local administrative access to the router. You can connect a terminal to the
console port only.
To connect the console port to a terminal (an ASCII terminal or a PC running terminal emulation
software), use the following procedure:
Step 1 Connect one end of the RJ-45 rollover cable to the RJ-45-to-DB-9 adapter (labeled TERMINAL).
Step 2 Connect the other end of the rollover cable directly to the console port on the router. (See Figure 3-11.)
Figure 3-11 Connecting the Console Terminal
5
I
ACT
ACT
LNK
1
PWR
S
LO
T
0
S
LO
T
1
PWR
SYS
RDY
DS0
RF
uBR7114
US0
E
N
DS0
US1
US2
US3
CONS AUX
FE 0/1
FE 0/0
35827
Cisco uBR7100 series router
Console port
(RJ-45)
RJ-45-to-RJ-45
rollover cable
PC (laptop)
RJ-45-to-DB-9 adapter
(labeled TERMINAL)