Filter
Top Products
4
Card Slot and Logical Interface Numbering
The cable interface line card slots maintain the same slot number regardless of whether other cable interface line cards are
installed or removed. However, when you move a line card to a different slot, the logical interface number changes to reflect the
new slot number. (See Figure 3.)
Figure 3 Cable Interface Card Locations
2 Preparing for Installation
This section contains information about tools and parts, warnings, site preparation information, and information for
workbench or tabletop installation and rack-mount installation.
Site Preparation
Check the following:
• Site is capable of maintaining an ambient temperature of 32 to 104
o
F (0 to 40
0
C).
• Site power is available and adequate
• Cabling requirements (type, distance)
• Rack-mounting requirements (working space, proper airflow)
Site Environment
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be accessed only
through the use of a special tool, lock and key, or other means of security.
Statement 1017
Warning
This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation.
Install only in accordance with national and local wiring regulations.
Statement 1045
1
Cable interface card location 1
2
Cable interface card location 2
CISCO
186600
1 2