Cisco Systems UC520W8UK9J Computer Hardware User Manual


 
3
Cisco Software Licensing Information for Cisco Unified Communications 500 Series for Small Business
OL-15900-01
Installing an Evaluation License
Step 3 To convert the PAK to a license, submit the PAK code and UDI of the router to Cisco's online license
portal:
http://www.cisco.com/go/license.
After entering the appropriate information at the above URL, you will receive an email containing the
license information which you can use to install the license.
Step 4 Using CCA, follow the procedures given in this document to upgrade the license you have obtained
depending on your license type.
License Type Descriptions
This section describes the types of licenses that Cisco Configuration Assistant 1.5 supports.
Evaluation License
Evaluation licenses are non-node-locked, metered licenses that are bundled with the Cisco IOS image
and valid for a limited period of time. Use this license only when there is no permanent, extension, or
grace-period license for a feature. You must accept the End User License Agreement (EULA) before
using this license.
Extension License
Extension licenses are node-locked metered licenses that are issued through the Cisco licensing portal.
You must accept the EULA as part of the installation of this license.
Permanent License
Permanent licenses are node-locked licenses with no associated usage period. These licenses are issued
through the Cisco licensing portal. You must accept the EULA as part of the installation of this license.
Installing an Evaluation License
To install a new evaluation license or to increase or decrease the number of licenses, follow these steps:
Step 1 In CCA 1.5, click License Management from the Maintenance tab in the left navigation pane.
Step 2 In the License Management window, click on Device/Feature as shown in Figure 1. To obtain an
evaluation license, choose Evaluation from the Action drop-down menu.