Cisco Systems UCSFI6248E1628P Switch User Manual


 
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 10
Pause frames (IEEE 802.3x)
QoS
Layer 2 IEEE 802.1p (class of service [CoS])
Eight hardware queues per port
Per-port QoS configuration
CoS trust
Per-port virtual output queuing
CoS-based egress queuing
Egress strict-priority queuing
Egress port-based scheduling: Weighted Round-Robin (WRR)
High Availability
Hot-swappable field-replaceable power supplies, fan modules, and expansion modules
1+1 power redundancy
N+1 fan module redundancy
Management
Interconnect management using redundant 10/100/1000-Mbps management or console ports
All management provided through Cisco UCS Manager; please refer to the Cisco UCS Manager data sheet
for more information about management interfaces
Low-Latency, Lossless 10 Gigabit Ethernet Unified Network Fabric
PFC (per-priority pause frame support)
Data Center Bridging Exchange (DCBX) Protocol
IEEE 802.1Qaz: Bandwidth management
Layer 2 multipathing (future)
Unified Ports
All ports configurable as 1/10 Gigabit Ethernet or 1/2/4/8-Gbps Fibre Channel
Industry Standards
IEEE 802.1p: CoS prioritization
IEEE 802.1Q: VLAN tagging
IEEE 802.1s: Multiple VLAN instances of Spanning Tree Protocol
IEEE 802.1w: Rapid reconfiguration of Spanning Tree Protocol
IEEE 802.3: Ethernet
IEEE 802.3ad: LACP
IEEE 802.3ae: 10 Gigabit Ethernet
SFP+ support
RMON