Filter
Top Products
Related Features and Technologies
Basic V110 for MICA Modems on Cisco Access Servers 3
— 64k bps
Related Features and Technologies
This feature requires special modem code to be downloaded to the MICA Modems. See the online
CCO modem information page.
Related Documents
See the modem code online documentation for the platform you are using:
• Firmware and Portware Information
http://www.cisco.com/univercd/cc/td/doc/product/access/fwpwinfo/index.htm
See also the following documents:
• 12.0 Dial Solutions Command Reference (DR)
• Cisco AS5800—Modem and System Management Features for the Cisco AS5800
• Online product-specific release notes for the corresponding platforms on the appropriate Cisco
IOS release. Start from the appropriate Cisco IOS numbered release on this page:
Cisco IOS Software Configuration:
http://www.cisco.com/univercd/cc/td/doc/product/software/index.htm
Supported Platforms
• Cisco AS5200 in Cisco IOS Release 12.(4)XI1
• Cisco AS5300 in Cisco IOS Release 12.(4)XI1
• Cisco AS5800 (not currently supported)
Prerequisites
Supporting boardware and modem code on the MICA modems and special versions of the CSM on
certain platforms. See Firmware and Portware Information, under the “Related Documents” section.
Supported MIBs and RFCs
The current Modem Management MIB objects for MICA modems will also be used for V.110. One
minor change is in the SNMP agent code. This change returns the correct modulation type for V.110
when it does a look up of the modulation for MICA modems.