Filter
Top Products
NOTE: For details on placement options such as using the stands
or wall-mounting, please refer to the User Guide on the CD-ROM.
Connect one end of an Ethernet
network cable to the LAN port on
your PC, then connect the other
end to Ethernet port 1, 2, 3, 4, or 5
on the Bridge.
Connect the power adapter to the
Bridge’s Power port, and then plug
the other end into an electrical
outlet.
The Power LED on the front panel
will light up green as soon as
the power adapter is connected
properly.
Hardware installation is now complete.
Follow these instructions to set up the Bridge in Infrastructure mode. For
information on advanced conguration refer to the User Guide on the CD-ROM.
Assign your PC a static IP address
in the same subnet as the Bridge’s
default IP address, 192.168.1.226.
Open your web browser. Enter
http://192.168.1.226 in its Address
eld. Press Enter.
A.
B.
C.
A.
B.
Installation1�
Conguration2�