Filter
Top Products
Corporate Headquarters:
Copyright © 2000–2003 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Catalyst 6500 Series 24-Port FXS Analog Interface
Module Installation Note
Product Numbers: WS-X6624-FXS
This publicationdescribes how to install the Catalyst 6500 series 24-port Foreign Exchange Station
(FXS) analog interface module. The FXS interfaces connect directly to standard analog telephones or
fax machines.
Contents
This publication consists of the following sections:
• Safety Overview, page 2
• Features, page 5
• Front Panel Description, page 9
• Specifications, page 10
• Installing the 24-Port FXS Analog Interface Module, page 11
• Connecting a Cable to the 24-Port FXS Analog Interface Module Port, page 15
• What to Do After Installing the 24-Port FXS Analog Interface Module, page 16
• Regulatory Standards Compliance, page 17
• Obtaining Documentation, page 17
• Obtaining Technical Assistance, page 19
The FXS interfaces supply ring voltage, dial tone, and other services as described in this publication.
FXS ports emulate the central office (CO) or private branch exchange (PBX) in that they provide a
service to an analog telephone or fax machine. The telephone or fax machine behaves as if it is connected
to a normal CO or PBX line.
Note All signaling configuration is done through Cisco CallManager. Refer to the Cisco CallManager
documentation for complete configuration details.