Filter
Top Products
— 11 —
2.2 Printer Cover Inside
● Paper feed roller
Feeds paper as part of print mechanism.
● Paper-near-end sensor
Detects near paper end, change position in
accordance with the outer diameter of paper
core.
● Auto cutter
Cuts the paper with a command at the end
of printing. Cutting method is selectable
between partial cut and full cut with a
command.
● Print (thermal) head
Prints characters and/or graphic data on
thermal paper.
● Paper-end sensor
Stops printing when this sensor detects
paper end.
Print (thermal) head
Paper-end sensor
Paper-near-end
sensor
Auto cutter
Paper feed roller
● Interface connector (Serial, parallel, Ethernet, etc.)
Connects to the interface cable. A DIP switch is provided on the serial interface board.
● Cash drawer kick-out connector
Connects to the cable from the cash drawer.
● AC inlet (AC power type)
Connects to AC power cord
● Power connector (DC power supply type)
Connects to the cable from AC adapter.
Interface connector
(Serial, parallel, Ethernet, etc.)
Cash drawer
kick-out connector
Power connector
(DC power supply type)
Rear Connectors
Interface board
mounting screws
AC inlet
(AC power type)
USB connector