Filter
Top Products
— 18 —
4.2 Removing Jammed Paper
1. Tu rn the printer power off.
2. Open the printer cover.
3. Remove the jammed paper including any paper chips remaining. (Remove
the paper roll set in the holder as well.)
4. Reinstall the paper roll and close the printer cover.
5. Turn on the printer. The auto cutter mechanism is initialized and the alarm is
cleared.
CAUTION!
■ If the cutter blade remains protruded with paper jammed, press the FEED button. If the
cutter blade does not move back, performe the above step 1 through 3 and then turn
the printer on without a paper roll. Contact your Citizen Systems dealer. Be carefull
not to have your hand injured by the cutter blade in the operation.
■ The print head is hot immediately after printing. DO NOT touch it with your hand. DO
NOT touch the heating element of the head with a bare hand or metal object either.
4.3 Cleaning the Print Head
CAUTION!
The print head is hot immediately after printing. DO NOT touch it with your hand. DO
NOT touch the heating element of the head with a bare hand or metal object either.
Print (thermal) head
1. Tu rn the printer power off.
2. Open the printer cover.
3. Wait several minutes. Wipe off any debris on the heating element of the
head using a cotton swab soaked in ethyl alcohol.