Citizen S4000M/CT Printer User Manual


 
— 14 —
2.2 Printer Cover Inside
2.3 Other Built-in Functions
Buzzer
This printer has a built-in buzzer. It is operated in case of an error, operation,
or by a command.
User memory
Allows downloading of user-defined characters and logo data in the
nonvolatile memory. This data remains stored even after the printer power
is off. For the registration method, refer to Command Reference Manual in
separate document. To acquire the Command Reference Manual, contact your
Citizen Systems dealer.
Memory switch
Setting of various kinds of functions can be stored in nonvolatile memory.
The functions are valid even if the printer power is turned off.
Paper feed roller
Feeds paper as part of print
mechanism.
Paper-near-end sensor
Detects near paper end, change
position in accordance with the
outer diameter of paper core.
Auto cutter
Cuts the paper with a command
at the end of printing. Cutting
method is selectable between
partial cut and full cut with a
command.
* Factory default of the memory
SW4-8 is set to "Partial cut", so that
a command will be ignored.
However, full cutting is set for the
model supporting label.
Print (thermal)
head
Manual cutter
Auto cutter
Paper-near-end
sensor
Paper feed roller
See 4.6 Error Indication
Paper-end sensor
Manual cutter
Tears the paper by hand.
Print (thermal) head
Prints characters and/or graphic data on thermal paper.
Paper-end sensor
Stops printing when this sensor detects paper end.