Filter
Top Products
SR-260N_English_090324.rtf SIZE: 135x75mm / SCALE 2:1 / 2009/3/24
E17
DEG STAT
Σ
x
2
= ? [ 2ndF ] [
Σ
x
2
]
347.00
DEG STAT
σ
σ
= ? [ 2ndF ] [
σ
]
2.42
DEG STAT
[ 2ndF ] [ CP ] 12
12.
CP
USL
DEG STAT
[ = ] 2
2.
CP
LSL
DEG STAT
CP = ?
[ = ]
0.69
CP
DEG STAT
[ 2ndF ] [ CPK ]
12.00
CP
USL
DEG STAT
[ = ]
2.00
CP
LSL
DEG STAT
CPK = ?
[ = ]
0.57
CPK
(Note) : The calculator keeps a record of all the entries you make and
these entries are retained even if auto power-off or turning off,
unless exiting STAT mode.
Viewing statistics data
Pressing [ DATA ] or [ = ] key under ED mode can view the statistics
data you have entered. The difference between [ DATA ] and [ = ] is
the item of the data entry appears 1.5 sec. before the value by
[ DATA ], the value appears immediately without the item by [ = ].
(Ex.2) : View the statistics data based on Ex. 1.
Step 0 : Press [ 2ndF ] [ EDIT ] to enter ED mode.
(Method 1) :
Step 1 : Press [ DATA ] once to view the first data.
DEG ED STAT DEG ED STAT
dAtA 1
1.5 sec.
→
2. 0 0
Step 2 : Continue pressing [ DATA ] once for each data, it will display
data 2, 5.00, data 3, 5.00, data 4, 5.00, data 5, 5.00, data 6,
9.00, data 7, 9.00, data 8, 9.00 in sequence.
(Method 2) :
Step 1 : Press [ = ] once to view the first data
DEG ED STAT
2.00
Step 2 : Continue pressing [ = ] once for each data, it will display 5.00,
5.00, 5.00, 5.00, 9.00, 9.00, 9.00 in sequence.
Adding a data entry
(Ex.3) : Add data 9 = 10 to Ex.1