Filter
Top Products
280-7804-00
DVC920 11
Setting Acoustic Features (ADJUST MODE)
4. Press the [ ] or [ ] [DISP] button to select
the speaker to adjust.
• CTR-SP: center speaker
• SRD-SP: rear (surround) speaker
5. Press the [ ] or [ ] [VOL] button to adjust
the delay time.
• The [CTR-SP] adjustment range is 0 to 5 ms.
• The [SRD-SP] adjustment range is 0 to 15
ms.
• Holding down the [ ] or [ ] [VOL] button
to increase or decrease the value in a fast
forwarding way.
6. Press the [ADJUST] button to return to the
original mode.
Setting the Dolby digital functions
(Dolby D)
The Dolby digital functions consist of the Dolby
Pro Logic II on/off function and dynamic range
compression switching.
●
Dolby Pro Logic II:
Dolby Pro Logic II is a matrix decoding technol-
ogy in which the updated digital matrix technol-
ogy is applied and Dolby pro Logic is further im-
proved. It realizes excellent 5.1 channel repro-
duction of Dolby surround source as well as ste-
reo sound sources such as CDs, thereby caus-
ing a surround channel to be full-ranged (20 Hz
to 20 kHz) and become stereo. Therefore, you
can enjoy any stereo sources with dynamic sound
of 5.1 channel.
Note:
• The Dolby Pro Logic II function sound effects are
only supported for stereo signals.
• This function is not available when center
and rear (surround) speaker were turned off
in the section “Turning speakers on or off”.
●
Dynamic range compression function
(D-RANGE):
This function compresses the dynamic range of
Dolby digital to maintain low level sounds such
as actor conversation and suppress loud sound
volumes.
These functions are only available on Dolby digi-
tal DVD discs.
1. Press the [ADJUST] button to enter the AD-
JUST MODE.
2. Press the [ ] or [ ] [DISP] button to change
to the [Dolby D ] display.
3. Press the [ENT] button to display the [D-
RANGE].
4. Press the [ ] or [ ] [DISP] button to select
[D-RANGE] or [Dolby PL II].
5. Press the [ ] or [ ] [VOL] button to select
the adjustment value.
• In [D-RANGE], settings are switched be-
tween [MAX], [STD] and [MIN].
• The initial value is [MAX].
• MAX: maximum dynamic range mode of
the original source
• STD: recommended mode for standard lis-
tening
• MIN: the most compressed dynamic range
mode that renders even low sounds easy
to hear.
• This button is used to turn [Dolby PL II]
mode [MUSIC], [MATRIX], [MOVIE], [VIR-
TUAL] and [OFF].
• The initial setting is [OFF].
• MUSIC MODE: appropriate for CDs and
other stereo audio.
• MATRIX MODE: appropriate for AM/FM
radio audio sources.
• MOVIE MODE: appropriate for audio
sources such as movies.
• VIRTUAL MODE: appropriate for audio
sources such as movies.
Notes:
• When Dolby Pro Logic II is selected, the sound
volume decreases due to the inherent response
characteristics of the Dolby Pro Logic II system.
As a result, the user should lower the sound vol-
ume before switching the Dolby Pro Logic II func-
tion [OFF].
• The Dolby Pro Logic II mode cannot be selected
when center speaker and rear speakers have been
set to [OFF] with the “Turnig speakers on or off
(SP-SEL)” function.
6. Press the [ADJUST] button to return to the
original mode.
280-7804-00_09-18(En) 2/22/02, 2:06 PM11